Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

VDO EGT Installation info needed

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

VDO EGT Installation info needed

Post by sootygu »

Can anyone supply the instructions to install a VDO EGT.

I require the information to connect the wires in the back of the gauge.

Thanks
Top
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

Post by Hales231271 »

On the back of the gauge there are 4 pins positions.

1 , 2 , + , -

Position " 1 " -ve thermocouple (red wire)
Position " 2 " +ve thermocouple (yellow wire)

Position " + " 12v ignition (fused)
Position " - " groung/earth

Cheers
Dazza
Top
Posts: 522
Joined: Sat Jan 29, 2005 7:40 am
Location: Melbourne, Vic

Post by Toy80Diesel »

Thats it.

If you google "vdo egt" under the images tag, you'll get the diagram.

Search is your friend! ;)
Shut Up, Get Out, & Start Digging...
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

Thanks for the info
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests