Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

swapping disco running gear into a rangie

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

swapping disco running gear into a rangie

Post by matt_w »

i was wondering if it was worth while wrecking a 1994 disco for parts for my 1988 rangie................ diffs, axles, running gear, brakes, etc.......
Top
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

Yes Yes Yes. You will get fine spline axles, a decent'box and some antiroll bars etc. I did a similar job a while back, and it transformed the Rangie. Try and fit the brakes and everything too,(unless it has ABS) as the whole vehicle will feel 'fresher' to drive..

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Top
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Post by Utemad »

A guy in our club did that. I think it was a 1994 Disco into a 1989 Rangie. He swapped the 3.9 motor, auto and transfer. Not sure about the rest though.

He is jessie_xa from this board.
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

if the chassis is straight , just swap the body.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 6 guests