Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Newbie Questions about Jeep Cherokee

Tech Talk for Jeep owners.

Moderator: GUtripper

Post Reply
Posts: 7
Joined: Fri May 05, 2006 6:29 pm
Location: Brisbane

Newbie Questions about Jeep Cherokee

Post by wannabee »

Gidday all,

I need to replace my rusty old FJ60 Land Cruiser, and browsing thru a dealers yard, I was surprised by the low price of second-hand Jeeps. Looking further on the Net, there seem to be quite a few with under 150,000km going for $8-10k.

Can anyone give me some advice on the 1990s models of Jeep Cherokee:

Reliability?
Fuel consumption (4 litre petrol)?
Performance off-road (mainly beach and sand tracks)?
Availability and cost of spare parts?
Anything else an ignorant buyer should beware of?

Any help would be gratefully received.

Thanx,

Mike
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Post by DionM »

My comments are on XJs ...

Relability - Not bad. Lots of parts and advice on the net available if there are issues.

Fuel consumption - Bad. I average 15l/100kms in my 01 XJ Auto around town. On the highway it is better.

Beach - Very good. On sand the engine just has so much power it makes mincemeat of it. I've not done much beachwork in mine, but in sections of soft stuff where others were j-u-s-t making it through I cruised through in "D" 4Hi without a worry in the world :cool: Clearance is good due to the smaller diff pumpkins.

Spares - Jeep can be exxy. But lots of other sources from Aust or even US.

Anything else - Post 97 the interiors got a lot more friendly (not so American kitch), and the engine got better as the years went by.
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 172
Joined: Fri Feb 04, 2005 8:12 am
Location: Mel-bourbon

Post by franco »

they are very capable (even stock), bit thirsty, great engines. however, they are unibody frames (no body lifts), and although they stand up to offroad conditions, they are not considered as strong as ladder chassis ( i think post 96s or 97s were made more rigid), but becuase of this they are lighter than most 4bys of its size range, weighing about as much as a falcon or commodore, and drive just as comfortably. mild mods can really enhance its offroad performance.
Posts: 16
Joined: Tue Apr 19, 2005 4:32 pm
Location: Pretending to do booty fab in Wooders Garage

Post by wolfe 503 »

xj's are great, easy to work, on lots of mods can be done, plenty of people can give lots of good advice, Parts easily areasonably cheap to buy
(you just have to look in the right place)
:finger: :finger: I really like the pre97 interior fawk the jap crap :finger: :finger:
Pretending to do booty fab in wooders garage
Posts: 7
Joined: Fri May 05, 2006 6:29 pm
Location: Brisbane

Thanx

Post by wannabee »

Thanx for the replies. It looks like the Jeep goes to the top of the short list. The fuel consumption is crook, but not as bad as a petrol 'Cruiser.

Browsing the comments an American Jeep forum, it sounds like they are built like a tank. The only recurrent troubles seem to be cracking of the exhaust manifold and leaking main rear oils seals.

Thanx again,

Mike
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Post by DionM »

wolfe 503 wrote: :finger: :finger: I really like the pre97 interior fawk the jap crap :finger: :finger:
:P Each to their own. :cool: :D
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Re: Thanx

Post by DionM »

wannabee wrote: leaking main rear oils seals.
Common-as. Don't worry about it.
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 16
Joined: Tue Apr 19, 2005 4:32 pm
Location: Pretending to do booty fab in Wooders Garage

Post by wolfe 503 »

DionM wrote:
wolfe 503 wrote: :finger: :finger: I really like the pre97 interior fawk the jap crap :finger: :finger:
:P Each to their own. :cool: :D
:armsup: :armsup: Classic not plastic (thanks Dave) :armsup: :armsup:
Pretending to do booty fab in wooders garage
Posts: 172
Joined: Fri Feb 04, 2005 8:12 am
Location: Mel-bourbon

Post by franco »

cracking exhaust mainfol can be easily fixed by welding, or its a great excuse to get some headers.
Posts: 399
Joined: Mon Nov 25, 2002 5:29 pm
Location: Sydney

Post by AussieCJ7 »

wolfe 503 wrote:
DionM wrote:
wolfe 503 wrote: :finger: :finger: I really like the pre97 interior fawk the jap crap :finger: :finger:
:P Each to their own. :cool: :D
:armsup: :armsup: Classic not plastic (thanks Dave) :armsup: :armsup:
But that aint classic :finger: when is your old school monster going to hit the tracks :armsup:
Posts: 16
Joined: Tue Apr 19, 2005 4:32 pm
Location: Pretending to do booty fab in Wooders Garage

Post by wolfe 503 »

AussieCJ7 wrote:
But that aint classic :finger: when is your old school monster going to hit the tracks :armsup:
Hey behave its as classic as your motor :finger: Dont talk to me about the other one :roll: . One day it will be done, one heap at a time :bad-words:
Pretending to do booty fab in wooders garage
Posts: 399
Joined: Mon Nov 25, 2002 5:29 pm
Location: Sydney

Post by AussieCJ7 »

wolfe 503 wrote:
AussieCJ7 wrote:
But that aint classic :finger: when is your old school monster going to hit the tracks :armsup:
Hey behave its as classic as your motor :finger: Dont talk to me about the other one :roll: . One day it will be done, one heap at a time :bad-words:
:armsup:

yeah but it would be good to finish them in the order you start them :idea:
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

What's better than having one dismantled Jeep project?
Multiple :armsup:
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 16
Joined: Tue Apr 19, 2005 4:32 pm
Location: Pretending to do booty fab in Wooders Garage

Post by wolfe 503 »

AussieCJ7 wrote:
yeah but it would be good to finish them in the order you start them :idea:
Since when was that a criteria for starting a build.
Sorry I missed that memo :finger: .
Besides Im not Robinson Crusoe, just ask anyone with multiple jeeps :roll:
Pretending to do booty fab in wooders garage
Posts: 224
Joined: Tue Apr 25, 2006 4:31 pm
Location: northern beaches

Post by sasjeep »

Go the xjImage
96 XJ auto 6 1/2 " LIFT FR -REAR LOCKERS 35x12.5x15 Baja claws small vodoo doll for good luck
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests