Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nissan gu tray back severe violent steering shake

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 44
Joined: Wed Oct 19, 2005 8:48 pm
Location: bayside brisbane

nissan gu tray back severe violent steering shake

Post by nispro4x4 »

hellllllllpppppp please . :x :x severe front end steering shakes almost seems to self destruct replaced both draglink ends checked all tierod ends; wheel bearings;swivel bearings;panhard bushes trailing arm bushes etc etc replaced swivel housing kit $800 later no better. steering wheel shakes violently at 60kph and 80klm. could be steering box ? Also i've had a wheel balance and wheel alignment all OK.
Last edited by nispro4x4 on Sat Aug 26, 2006 9:17 am, edited 1 time in total.
Posts: 109
Joined: Sat Jul 08, 2006 11:31 am
Location: Rockingham, Western Australia

Post by gorilla »

i don't any experience with GU's mate but if your wheels are out of balance this can happen. It happened on my MK swapped the wheels back to front sovled the problem. I would recommend getting your wheels balanced, cheap and if it doesn't work you haven't lost mch. This is definently were i would start.

Good luck
GQ leafy ute - TD42, 2" lift, parabolics up-front, dove tail tray and 37" IROKs
Posts: 262
Joined: Mon Sep 20, 2004 2:13 pm

Post by evil_hitman »

i had this happen when i didn't have my steering dampner on once.
Check it is still attatched and functioning properly???
2000 GU ST Patrol 4.2 turbo oiler not so bog stock anymore
"EVILGU"
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

cheak your lower controll arm bushes i swear they may look ok but there not...


do this simple test...

get a pinch bar ( crowbar) and put the spade end inbetween the controll arm and the diff mount... and force it back and forth ... there should be next to no movement... if there is.... there phucked.!


and thats what is causing your shake..
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

double check the bushes in the radius arms, panhards etc, check the wheel bearing for movment, check how tight the wheel bearings are. check alligment, check ballance. check castor, ie what lift if any and if lift what correction
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 374
Joined: Wed May 24, 2006 6:04 pm
Location: Melbourne,VIC

Post by MQSWBUTE »

i had the same problem

wheel balance sorted it out not it drives like a brand new car again

i found my right hand rim was buckled beyond repair 1kg of lead would not fix it

get a wheel balance it cost me $22 for 3 tyres

cheers justin
No sig line pics please.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests