Hawse / Fairleads slot preperation

Post by **gali** » Wed Aug 30, 2006 6:06 am

hi guys,

I just finished building my own winch bumper & i need the dimensions for the rectangular shape dimensions to cut off the front of the bumper so I could install the Hawse / Fairleads.

I need the horizontal dimension, also the vertical and at last the center of 2 holes dimensions (also which kind of bolts are used to mount the Hawse to the bumper.

All dimensions are needed just to cut the slot that the Hawse will be mounted on.

For the guys that probably asks them self why i don't check the Hawse himself? well, I dont have it yet.

Thanks,

Gali.

Post by **superzuki** » Wed Aug 30, 2006 8:38 am

My hawse fairlead is a warn one so it just bolts on with the bolts that go through to hold your winch in place not sure of the dimension as i dont have my car at the moment if that helps at all

Post by **bazooked** » Wed Aug 30, 2006 10:09 am

http://www.warn.com/

Post by **gali** » Wed Aug 30, 2006 4:08 pm

bazooked wrote:http://www.warn.com/

The link doesn't help. I checked it up already - no dimensions mentioned for the Hawse.

Post by **Roctoy** » Wed Aug 30, 2006 8:36 pm

you guys suck at this.

the dimensions I have are 185 x 25mm

Chris

Post by **gali** » Thu Aug 31, 2006 4:39 am

thanks mate

Outer Limits 4x4 Board

Hawse / Fairleads slot preperation

Hawse / Fairleads slot preperation

Who is online