Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HZJ80 Auto Transmission part no question

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 206
Joined: Tue Apr 12, 2005 1:59 pm
Location: Rockhampton QLD

HZJ80 Auto Transmission part no question

Post by Pauwolf »

I am chasing a part number for the control ECU for a A442F Auto transmission for a HZJ80

I have been told it is 89531-60010 listed as a transmission relay

what is 89533-60020 listed as 4x4 computer

I am trying to track down an ecu so I can convert from 5 speed to auto

thanks
Paul
91 FJ 80 Project on the go - air lockers, 3in lift, super duper 3F, 36" pedes, toyota V8 getting prepped now
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Paul the 80 didnt come out hj80auto...the closest it did was hdj80, It has an auto computer that bolts in above where the clutch pedal is now. It is not the transmission relay, that controls constant and low range centre diff actuation and is under the dash on drivers pillar.
Then you need a TPS switch for your fuel pump so the computer knows where your accelerator is....temp sensors, speed sensors...its all too hard.
Mate, forget the a442f....look for the a440f that came out in 1990-1992 turbo diesels, it was a hydraulic 4 speed auto, and has no electronice :)
Bolt on and go.
Speak to Rodney at Wholesale automatics in Bayswater, melb....surf for his web site on the net. He will help you out and assist if necessary
Andrew
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests