Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help - 03 sr5 lux blowing transfer seals- need FW hubs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
GBC
Posts: 111
Joined: Tue Sep 20, 2005 2:44 pm
Location: Camp Hill

Help - 03 sr5 lux blowing transfer seals- need FW hubs

Post by GBC »

I'm running an auto locker and ADD which means the front propshaft is continually spinning and apparently builds enough pressure to blow seals???

I'm keen to get f.w. hubs to prevent this.

Apparently there are two types - anyone know which one will suit mine?


Cheers in advance

C.J.
Top
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

Post by Hales231271 »

Get the free wheeling hubs from a poverty pack Hilux of the same year/model.
Bolt straight on.
I think they are 28 spline.
Haven't heard of different types from 97-04 model

Cheers
Dazza
Top
GBC
Posts: 111
Joined: Tue Sep 20, 2005 2:44 pm
Location: Camp Hill

Post by GBC »

Thanks Dazza - will ring around the wreckers
Top
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

Post by Hales231271 »

When you pull off the original drive plates you may find it hard.
There are two tapped holes in the plate that you can screw a bolt int which will pull the plate off.
Make sure you use high tensile bolts but.

Cheers
Dazza
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest