Hey Guys
I have a leaky DOHC. And getting sick of having a leaky DOHC.
2 litres of oil per 1000km. And that was leaked, so I got the cam cover gaskets replaced as that it where the leak was identified as coming from by the Mitsi dealer. I also go the cam belt done in the process and a few other things.
After paying the bill I got the vehicel back and it was a bit rumbly so I took all the belts off and the rumble continued, so back to the vet it went. But that wasn't the only reason it went back - It is still leaving a rather good size patch of oil on the ground.
Now the mechanic is talking about it coming out the back of one of the heads. My question is WHY.
Why would it all of a sudden spit a cam cover gasket and also whereever this oil is coming from. Maybe it was coming from here all along, It is like something is blocked and creating excess pressure
Any ideas at all - Help........!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Leaky DOHC
Moderator: -Scott-
Leaky DOHC
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
Who is online
Users browsing this forum: No registered users and 0 guests