The anti lock brake light on my 1993 RRC has come on again. No problem its probably just a sensor gap issue. I have just finished driving it for over 5000ks since it came on and the brakes work fine.
I have the workshop manual which tells me how to read and clear the code, and have done it before. Problem is, I don't know which wires to short out to start the process, the manual says to use "Special Part number ????".
Anyone know what to short out?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
anti lock brake light
Moderator: Micka
here goes...
1)Switch off ignition
2)remove seat side trim and front cover from seat base.
3)Unplug ABS warning plug relay (it has a green base, and is next to the 3 fuses.)
4) turn ignition back on and check warning lamp is on.
5)bridge the Black/pink and black wires on the diagnostic plug, the blue one at front of seat base.
6)after 5 secs ABS lamp will go out as code cycle commences.
I hope you have a code list, as my typing skills leave a bit to be desired...
JC
1)Switch off ignition
2)remove seat side trim and front cover from seat base.
3)Unplug ABS warning plug relay (it has a green base, and is next to the 3 fuses.)
4) turn ignition back on and check warning lamp is on.
5)bridge the Black/pink and black wires on the diagnostic plug, the blue one at front of seat base.
6)after 5 secs ABS lamp will go out as code cycle commences.
I hope you have a code list, as my typing skills leave a bit to be desired...
JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Who is online
Users browsing this forum: No registered users and 1 guest