Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series rear diff

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

80 series rear diff

Post by scottmcguinness172 »

hey all i went away on the weekend and i took off at an intersection and my car make a clunky noise from the rear diff only when i take off sometimes tho and it seems to have a lot a slop and when i get under the car a turn the tail shaft hard enough it makes the clunk noise would any body have any sort of idea what it could be or what it would cost to rebuild and what would be idea to get done to it im not rich so yea not to expensive cheers all advice would be appreciated

regards scott
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

sounds like back lash, but could also be a uj problem. assuming your uj's are ok pulling the centre out and having new bearings put on should cost bugger all from a good diff shop. whilst it is out get the lsd shimmed or put a locker in.
MUD, MUD, GLORIOUS MUD!
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

You need a mechanic to look at it, you can drain the oil and catch what comes out to show him aswell, bearing kits are on ebay for $120, if it is gears, sms me, i have a set.
Andrew
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests