Hi has anyone used the Bellhousing Conversion that Castlemaine Rod Shop sells?( Part No. BH78 www.rodshop.com.au ) Its to put a Chev SB or turbo pattern Holden V8 into a GQ... I spoke to them and was told it is designed to use the Nissan Clutch Assembly all you need to do is get the Chev/Holden Flywheen drilled to take the Nissan Clutch.
My main concern is, What is the clapping pressure of the Nissan clutch with the STD 10.75 inch Clutch plate compared to the Chev 11 inch Clutch?
or do you think I could use the Nissan Clutch Plate (10.75") with a Chev 11" Pressure Plate? I wonder if the clutch fork will have enough travel to
engage and disengage the Chev pressure plate? I think the nissan throw out bearing will be big enough.
Any thoughts
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ V8 Bellhousing Conversion
Im of the opinion that the chev cluth is the way to go, there is a 12" clutch available if this will fit. if i was to do it again i would use a import turbo 700 auto from a 4x4, as this would not need a convertion for the bell housing, or the main shaft change, only the engine mount kit and the transfer adaptor,
if i was to use the 5 speed i would look hard at the largest clutch available, I have a rebuilt heavy duty GU 4.2 turbo clutch and it still is not that great, it does the job but it is not as heavy as i would like, i can still get it to slip if it is not not totaly engaged when the power comes on, and this is with the diesel, the petrol would be worse as it has i higher power out put,
cheers Phill.
if i was to use the 5 speed i would look hard at the largest clutch available, I have a rebuilt heavy duty GU 4.2 turbo clutch and it still is not that great, it does the job but it is not as heavy as i would like, i can still get it to slip if it is not not totaly engaged when the power comes on, and this is with the diesel, the petrol would be worse as it has i higher power out put,
cheers Phill.
Living the dream on the hill that floods
Who is online
Users browsing this forum: No registered users and 8 guests