Hi all - does anyone know if the side contour panels of the BW are the same width from the 80 series to GU Patrol (side by side drawers). The BW1000 is specified for both cars with the draw dimensions the same. Doesn't mention about the width of the side contour panels. So will it fit without the angle grinder?? I'm aware the fitting kits are different, which I assume is what bolts it to the floor. Any info would be appreciated.
Thanks
Mike
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Black Widow fitment from 80 series to GU
I've just purchased the kit to change my BW system from 100 -> GU, different plywood wings (6), and differendt supports for wings plus different bolt down system. Also recycling the 1/2 cargo-barrier so new bracket for this. I was supprised that all this only cost around $300. Being fitted on Tuesday, I have re-carpeted the whole lot today in preparation.
Who is online
Users browsing this forum: No registered users and 153 guests