Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff ratio Gas/diesel

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 72
Joined: Sat Aug 19, 2006 2:28 am
Location: Holland

Contact:
Contact JelmerMQ

Diff ratio Gas/diesel

Post by JelmerMQ »

What kind of diff ratio has a '86 diesel 5 speed with H233 diff and a '84 gasoline 4 speed and H233 diff?
Patrol 2.8 '84, twin carburators, Z-car header, 280ZX cam, SPOA, ARB lockers f+r, Ramsey winch, 33" Maxxis Mudders and some rust....
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Re: Diff ratio Gas/diesel

Post by RMP&O »

JelmerMQ wrote:What kind of diff ratio has a '86 diesel 5 speed with H233 diff and a '84 gasoline 4 speed and H233 diff?
It is a little hard to say exactly since you are in Holland. The Aussie Patrols got certain ratios....and I have found other places in the world got different ratios. For example European or Middle East Patrols don't always have the same ratios as Aussie trucks. Even if outfitted the same, ie SD33T and 5spd with H233 in Saudi Arabi may not have the same ratio as the same truck in Australia.

Best to just pull the diff and count the teeth. Aussies have the ratio on the vin plate but I have not seen that on other Patrols besides in Aus. My German 83 MQ for example doesn't have the raio on the vin plate(s).
www.rmp-o.com
Top
Posts: 72
Joined: Sat Aug 19, 2006 2:28 am
Location: Holland

Contact:
Contact JelmerMQ

Post by JelmerMQ »

Thanks for explain. I'll check the diff and count the theet.
Patrol 2.8 '84, twin carburators, Z-car header, 280ZX cam, SPOA, ARB lockers f+r, Ramsey winch, 33" Maxxis Mudders and some rust....
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

JelmerMQ wrote:Thanks for explain. I'll check the diff and count the theet.
Before counting the teeth or doing the jack it up and rotate the tail shaft way. Try the vin plate. In Aus it has HG?? printed on it. That will be HG43 means 4.3:1 diff ratio.
THOUGHT FOR THE DAY....
Top
Posts: 239
Joined: Sun Feb 15, 2004 5:36 am
Location: Maryland, USA

Contact:
Contact XterraGuy

Post by XterraGuy »

Indeed, the code should be on the VIN plate, probably under the hood high on the side or rear.
In search of an MQ (offset) H233b rear, housing only preferred, plus a complete GQ or GU front (4.6 ratio ideal) to be shipped to the US. Cheap! Email/PM if you can help.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest