arb locker problem

Post by **dirtyGQ** » Sun Sep 10, 2006 6:24 pm

my front locker won't start but when i connected it straight to the battery it ran ,my question is why wont it work of the switch because when u turn the compressor switch and the locker switch the light are on but no action (or traction) any idea would be great. cheers

Post by **simkell** » Sun Sep 10, 2006 6:55 pm

have checked to see if the switch is working? use a test light to see if power is coming back out of the switch. if none replace switch, if there is follow the wire to the relay, then relay to soeloid.

i forgot silly question have you checked the fuse?

Post by **J Top** » Sun Sep 10, 2006 9:42 pm

Have you an ARB rear ? if not and you wired the front to the ARB manual
it won't opperate till the rear is switched on. Change the switch wiring to suit a rear diff.
J Top

Post by **dirtyGQ** » Mon Sep 11, 2006 7:07 am

J Top wrote:Have you an ARB rear ? if not and you wired the front to the ARB manual
it won't opperate till the rear is switched on. Change the switch wiring to suit a rear diff.
J Top

mate no rear just a front and has been working before just can't figure it out . thanks

Post by **bazzle** » Mon Sep 11, 2006 8:09 am

Sounds simple,

1. Fuse
2. Relay
3. switch
4. wire come off ign feed

Bazzle

Post by **dirtyGQ** » Mon Sep 11, 2006 11:58 am

fuse holder was corroded to buggery. all fixed now thanks all

Outer Limits 4x4 Board

arb locker problem

arb locker problem

Who is online