Bump Stops

Post by **MQSWBUTE** » Mon Sep 11, 2006 6:23 pm

thinkin of cutting half the bump stop off to get a little more travel right now the tyres dont rub (35/12.5)
the question is do you see a problem with it ???

cheers
justin

Post by **jeep97tj** » Mon Sep 11, 2006 6:32 pm

The tyre looks very close to the chassie now removing the bump stop may cause it to rub? Just do 1 side if it doesnt work buy another from the wreckers.

Do u have enough up travel in your shocks??

Post by **MQSWBUTE** » Mon Sep 11, 2006 6:35 pm

yea penty of travel in the shocks i had them out today and measured up

Post by **pongo** » Mon Sep 11, 2006 7:43 pm

GO for it man, If i could i would. What type of kellys are they.

Post by **Brett S** » Mon Sep 11, 2006 8:09 pm

if that's an mq those bump stops are twice as long as the std ones on a shorty have al look at them and prob get them from a wrecker for stuffall

Post by **MQSWBUTE** » Mon Sep 11, 2006 8:10 pm

Kelly Safari DTR 35/12.5-15

Post by **MKPatrolGuy** » Mon Sep 11, 2006 8:10 pm

I pulled mine out completely

Post by **MQSWBUTE** » Mon Sep 11, 2006 8:14 pm

MKPatrolGuy wrote:I pulled mine out completely

what did u have a far as spring and body tyre size go
i got 2in body 2in sping and 35s

Post by **MQSWBUTE** » Mon Sep 11, 2006 8:18 pm

Brett S wrote:if that's an mq those bump stops are twice as long as the std ones on a shorty have al look at them and prob get them from a wrecker for stuffall

i still cant tell the diffrence people say round headlights are mq mine sqaure on the plate its a mq and anything after 85 then made sqaure headlights on em ...mines 84 im confused to know which one is which

Post by **MKPatrolGuy** » Tue Sep 12, 2006 12:43 am

MQSWBUTE wrote:
MKPatrolGuy wrote:I pulled mine out completely
what did u have a far as spring and body tyre size go
i got 2in body 2in sping and 35s

2" body lift, sagged springs & 35s.

Post by **NCpaj** » Tue Sep 12, 2006 2:24 pm

The tyre looks very close to the chassie now removing the bump stop may cause it to rub? Just do 1 side if it doesnt work buy another from the wreckers

i cut my bumpstops from 70mmish to 20mm i say cut them off

and for the rubbing on the chassis wheel spacers should fix that

Post by **Hoppy11** » Tue Sep 12, 2006 11:10 pm

They look like MK bump stops, before you cut, grab some MQ ones from a wrecker cause they are already short.
HOPPY

Outer Limits 4x4 Board

Bump Stops

Bump Stops

Who is online