Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Part number for GQ rear trailing arm bushes

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Part number for GQ rear trailing arm bushes

Post by cbr »

Does anyone know the part number for a genuine GQ trailing arm bushes?

I think they are 55045-06j00, but I want confirmation that these are the correct bushes to use?

I am making a 4 link for the 4runner and want to use standard rubber bushes in the links.

Thanks
Chris.
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

have a look in the bible in the nissan section
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

55045
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Chris if your not to worried I get my bushes from Wilkinsons and they are nissan skyline rear lower control arm bushes almost as big as a patrol.These bushes are a alloy outer bonded to a nylon bushing with a steel crush tube about $70 for a packet of 4 lots cheaper than original nissan bushes which were about $45 each or go to off road industries they do a replacment bush made with alloy outer nylon inner special design to get more twist out of they also sell the outer weld on tubes to weld to the end of your arms not to bad on price but not as good as the skyline ones your call but never had the ones I use flogg out yet.

Duncan
Team Evolution
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

ok, got a old bush and the part number is imprinted on the rubber - 55045-06j00

I know the gq bushes are expensive but I think they are the best compromise between flex and durability.

Chris.
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests