I have an 82 SD33, when checking build plates for diff ratio's the other day I noticed it didn't list them, I also noticed that the motor was listed as
"KR160 70kw @ 2600 rpm"
is this the norm. for an SD33, I thought it was the y160?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine code
Yeah, I am aware of the codes/plate I am looking for, I just can't find it.
the engine plate; on the inside of drivers front guard, behind headlight had the info on the engine specs.
there's another i.d plate on the firewall behind the airfilter box, it is a build plate that list's aust. design rule codes etc. mentions that it was a three seater, nothing on diff ratio's though????
I had the carrier out about two months ago, stamped onto the ring gear was 38.8 : 1, does this mean I am running 3.8 ratio's?
By the way thanks for info on the engine code Mr. RMP&O
the engine plate; on the inside of drivers front guard, behind headlight had the info on the engine specs.
there's another i.d plate on the firewall behind the airfilter box, it is a build plate that list's aust. design rule codes etc. mentions that it was a three seater, nothing on diff ratio's though????
I had the carrier out about two months ago, stamped onto the ring gear was 38.8 : 1, does this mean I am running 3.8 ratio's?
By the way thanks for info on the engine code Mr. RMP&O
Who is online
Users browsing this forum: No registered users and 3 guests