Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will it roll

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 116
Joined: Thu Jul 06, 2006 10:31 am
Location: victoria, beechworth

will it roll

Post by tuff4runner »

i have a 4runner 91 im about to put in 5inch lift and 265/75 r16 will it be ezy to roll or not
IF YOU OVER TAKE ME I WILL FOLLOW YOU HOME AND S*#T IN YOUR SLIPPERS
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Depends on how hard you try :D
Top
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

Bet ya cant
If you dont have panel damage you ain't trying hard enough
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

yeah, the 4runner will break something b4 it can get close enough to rolling . :finger:

I spose its a sensible question, Just worded wrong.
Cheers
Top
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

pongo wrote:yeah, the 4runner will break something b4 it can get close enough to rolling . :finger:

I spose its a sensible question, Just worded wrong.
Cheers
Unlike your CV smasher :finger: When you lifting it enough to put those creepys under it?


I bet you cant


Its a dare
If you dont have panel damage you ain't trying hard enough
Top
Posts: 139
Joined: Tue May 18, 2004 8:41 am
Location: Kanwal, Central Coast NSW

Post by DAWSO 4x4 »

i had a 6' lift in my 90mod 4runner it was stable enough but i went back to 4' and i found it alot better off road
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

DAWSO 4x4 wrote:i had a 6' lift in my 90mod 4runner it was stable enough but i went back to 4' and i found it alot better off road
Put it on a decent cross slope :lol: then we will see :twisted:
Kind Regards,
Brad
Top
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

i agree cross slope will be the big test off road, how big tyres are you running is there a need to go 6" why no a 4".
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Top
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

if you must incress your high that high, what about incressing your wheel track......
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Top
User avatar
TWISTY
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Contact:
Contact TWISTY

Post by TWISTY »

I rolled my old one which had 5" lift and 33's
Image
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

I never did hear how you rolled that 4 skinner Dave, do tell.


ps: that was my truck, quit trying to pass off my hard work as your own! :finger:
Top
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

rolling is easy if you are giving it enough, i rolled my single cab lux 3 weeks ago on bitumen going through a round about, doing no more than 40 km/h.. has bout 6 inch's of lift and 35's, gq diffs now going in for width, wheel track is just too narrow.
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Post by rixrunner »

I met a guy (and saw the truck) earlier in the week that rolled a stock standard one.

Blames his stupidity and speed … not the truck.
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

The big question is WHY do you need to go that high?
I have fitted 35s under my IFS lux with 0 susp lift and just a 40mm body lift (with a bit of trimming :) )
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Yeah Dave do tell. Was it too many brown lemonades or just bad luck :lol: Looks like a good job.

Matt
Top
User avatar
TWISTY
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Contact:
Contact TWISTY

Post by TWISTY »

Yeah had been drinking a phew(well a heap actually)....was at LCMP, was just after it had been raining at was about 11pm at night....going down the first descend of Club Rally....took a wrong line, front passenger side dropped into a hole, and the rear started to slide around (was slippery from the rain)....and over it went....rolled two and a bit times, then hit a tree on the passenger side, knocking it back onto its wheels, still running. Had 4 people in the car, none had seatbelts on, two were in the back lying on a mattress......amazingly nobody was hurt.....All just had some bruises. Learnt my lesson about drinking driving, and still can't believe how lucky we were, definitely my stupidest moment.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Wow, good story Dave. You're right, you were very lucky no one was hurt. So can you tell us more about what the 2 were doing on the mattress in the back? And while we're at it, if it was 2 ladies................pics? :armsup:
Top
User avatar
TWISTY
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Contact:
Contact TWISTY

Post by TWISTY »

bwaahahaha.....I wish.....I was sleeping in the rear of the 4runner that night, so had my mattress and shit all set up in the back....it stopped raining, and some bright spark thought it'd be a good idea to go 4x4ing......was my missus and a mate in the back, and me and another mates missus up front.....

The two girls wouldn't get back in the truck after it, and walked back to camp, while me and my mate did the rest of Club Rally, was great to not have to worry about panel damage anymore.

Went back the next morning, and found this classic tyre mould in the mud
Image

Popping the windscreen out for the drive back home to the sunny coast
Image
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Tuflux308 wrote:rolling is easy if you are giving it enough, i rolled my single cab lux 3 weeks ago on bitumen going through a round about, doing no more than 40 km/h.. has bout 6 inch's of lift and 35's, gq diffs now going in for width, wheel track is just too narrow.
similer thing happend to a mate i looked in my mirror as he came round the round about on 2 wheels over it went and it was a write off saged stock springs 31's 2nd gear in 2.8d not giving it to it.
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests