Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Dual tanks in 91 maverick or gq patrol whichever u call it
Dual tanks in 91 maverick or gq patrol whichever u call it
Gday i have bought a 91 maverick lwb. I have a dual tank set up on my swb mq patrol and wondering if it would be the same set up for an easy changeover or will i have to get mounts made up??
Hi Might not help you but I made up 2 tanks recentley to fit under the belly. They worked out real sweet.
The prop shaft runs through the middle. Clears nicely. The exhaust runs above the propshaft. The bungs are for pick-up and breather. Fillers join at a T-piece that runs up to filler neck. The pumps will fill the main tank.
These give me an extra 110liters. They're made of 4.5mm Alu.
The front hangs on the tube cross member behind the transfer case and then I welded brackets on the the front mount fo the upper control arms. It all worked out really nicely. The body lifts up exactly where I wanted to put the filler and pumps, so there is a nice space for it.
If I can get it on a lift I'll take some pics. If anybody wants the CAD files I can send them through.
The prop shaft runs through the middle. Clears nicely. The exhaust runs above the propshaft. The bungs are for pick-up and breather. Fillers join at a T-piece that runs up to filler neck. The pumps will fill the main tank.
These give me an extra 110liters. They're made of 4.5mm Alu.
The front hangs on the tube cross member behind the transfer case and then I welded brackets on the the front mount fo the upper control arms. It all worked out really nicely. The body lifts up exactly where I wanted to put the filler and pumps, so there is a nice space for it.
If I can get it on a lift I'll take some pics. If anybody wants the CAD files I can send them through.
Who is online
Users browsing this forum: No registered users and 3 guests