Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

legal body lift

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 39
Joined: Tue Sep 02, 2003 5:43 pm
Location: South West Vic

legal body lift

Post by 4wheelsdriven »

Hi guys, Is a 2" body lift the highest you can go in vic or are you aloud to go higher ?
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

dont trust forum hearsay... seek and ye shall find ;)

http://www.vicroads.vic.gov.au

Engineers list


Simon
Top
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

Post by wrksux »

your kidding right?
Vicroads told me 3 differnt things on the three times i called about a 50mm body lift, told my mech a differnt thing.
there website is a maze that they cant even use
It's simple: questions are inherently good. Your questions... not so much

2003 GUIII turbo intercooled 4.2 DX
Top
Posts: 22
Joined: Mon Jan 09, 2006 5:05 pm
Location: Geelong

Post by ARangie »

I agree, Best I could find on the web site was, no more than 1/3 on bump stop, but this was lowing or lifting, nothing on springs.

My mech told me 100mm all up either tyres, and body lift up to 50mm and suspension, but only 2 off these not all 3.

With my rangie I have 30mm body, gone up to 31.5 tyres, soon 32 simex, which are actually 33.4", and I'm guessing 40mm on pedder springs.
The over all height of the rangie will be just on 100mm over orginal height, with Simex.

So I think I'm right, cause thats as far as I'm going. I'm just going to fit a grader blade to the front or better still a PTO rotary hoe to take the tops off between the ruts. Then I won't need 36"boggers.
Town Vehicle - 02 TD5 SE Disco
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

wrksux wrote:your kidding right?
Vicroads told me 3 differnt things on the three times i called about a 50mm body lift, told my mech a differnt thing.
there website is a maze that they cant even use
agree

ARangie wrote:I agree, Best I could find on the web site was, no more than 1/3 on bump stop, but this was lowing or lifting, nothing on springs.

My mech told me 100mm all up either tyres, and body lift up to 50mm and suspension, but only 2 off these not all 3.
good to see thats changed again - last week it was all 3 (nobody can give a straight fuckin answer - vicroads, anyone!)
With my rangie I have 30mm body, gone up to 31.5 tyres, soon 32 simex, which are actually 33.4", and I'm guessing 40mm on pedder springs.
The over all height of the rangie will be just on 100mm over orginal height, with Simex.
which is also interesting when you work out, are they measuring the lift with a tape, so your sagged 8 inch lifted gear which has sagged to 2inch will pass?
Top
Posts: 47
Joined: Fri Mar 11, 2005 7:09 pm
Location: Brisbane

Post by bluemu »

Its all in the National Code of Practice for modification as of feb 2006, have a look in the existing thread about it and follow the link to the guidlines ;)
I'm from Brisbane, Australia
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 7 guests