i no there are alot of therds but didn;t find answers..... i am wanted to pu extended shackles on, only 2 inch and was wondering wat mods i have to do.
brake lines?
new shakle mounts?
and wats ppls views on them on a hilux... any information happy taken
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
extended shackles
Moderators: toaddog, Elmo, DUDELUX
These are what I have on my 4runner
I could not buy what I wanted so I made these
The pins are machined with a shoulder so the bushes cant be crushed and they are adjustable at about 2" and 4" at the spring end or about 1" or 2" chassis lift
http://img.photobucket.com/albums/v167/ ... _0062a.jpg
http://img.photobucket.com/albums/v167/ ... ackle2.jpg
I could not buy what I wanted so I made these
The pins are machined with a shoulder so the bushes cant be crushed and they are adjustable at about 2" and 4" at the spring end or about 1" or 2" chassis lift
http://img.photobucket.com/albums/v167/ ... _0062a.jpg
http://img.photobucket.com/albums/v167/ ... ackle2.jpg
Last edited by toyrex on Thu Sep 21, 2006 10:01 am, edited 1 time in total.
Adrian
www.chevtorque.com.au
www.chevtorque.com.au
Yes I can make some more shackles
It will be a while as I will have to get more pins machined, drilled and grease nipples fitted also make the plates and then get them cab coated
I sell them for $366 inc gst [ 4 shackles to a set ]
If anyone from this board wants any, $320 inc gst
I can also make them for the 60 and 75 landcruiser
I have been driving around, including a trip fron Perth to Melbourne, using these on my 4runner for about 6 years
now the disclaimer
These are for off road use only
It will be a while as I will have to get more pins machined, drilled and grease nipples fitted also make the plates and then get them cab coated
I sell them for $366 inc gst [ 4 shackles to a set ]
If anyone from this board wants any, $320 inc gst
I can also make them for the 60 and 75 landcruiser
I have been driving around, including a trip fron Perth to Melbourne, using these on my 4runner for about 6 years
now the disclaimer
These are for off road use only
Adrian
www.chevtorque.com.au
www.chevtorque.com.au
Yuk Yuk 
Who is online
Users browsing this forum: No registered users and 0 guests