standard clutch

Post by **newbyferoza** » Mon Sep 18, 2006 11:22 am

Well my clutch has now finally died. How much and where in Brisbane can I buy a standard clutch for a 96 feroza. I have a mate who is going to install it for me this weekend so just need to know where I can get one. I don't need a heavy duty one as I am selling the car in December as I am moving to the Cape for work.

Website · Post by **murcod** » Tue Sep 19, 2006 6:00 pm

A heavy duty is only $20 more and could be a good selling point.

Make sure you get the flywheel machined otherwise you might end up with a shuddering clutch.

Post by **Bowhunter** » Tue Sep 19, 2006 8:33 pm

I think I paid $365 for mine last year...

Post by **MightyMouse** » Wed Sep 20, 2006 10:33 am

Seems awfully expensive guys - if he is just fixing it up to sell then maybee a driven plate only may do the job.

Remember its just a Applause clutch - Daiken make them and they are virtually a stock item.

Can't remember exactly how much - chucked the recieps away - but under $100 rings a bell ( for the driven plate ).

Go to any brake and clutch place and that should be that....

Have a HEAVY DUTY system in mine - and after a few thousand k's its softened up a little but it was an absolute pain when new.

To make it sellable then would strongly recomend a stock unit.

Website · Post by **murcod** » Wed Sep 20, 2006 5:57 pm

They are not tha same as an Applause - although an Applause clutch will fit by the sound of it?

The Feroza clutch plate is a slightly larger diameter 200mm vs 180mm or 190mm depending on the Applause version.

http://cgi.ebay.com.au/Daihatsu-Feroza- ... dZViewItem

$195

Post by **MightyMouse** » Thu Sep 21, 2006 7:44 am

Hmmm - well the Appluase clutch that i fitted ( a Daiken competition unit ) was the same diameter - which makes sense as you would want the largest diameter possible for a race clutch.

Also have a new stock Applause driven plate at home will measure it.

Details Details Details.......

Post by **newbyferoza** » Thu Sep 21, 2006 2:22 pm

well i am at uni now will ring around this arvo have to buy it tomorow though as need the car next week, will let you know how much

Website · Post by **murcod** » Thu Sep 21, 2006 7:19 pm

If you to the link below:

http://www.valeoservice.com/html/australia/en/

, then click on the "Valeo Web Catalogue" buttom you can put in the Applause and Feroza details to see they are different.

The Daiken (Daikin?) web site is the same, but stuffed if I can find the site at the moment!

Post by **4x4xmore** » Thu Sep 21, 2006 10:59 pm

I bought my clutch from ABS at springwood last christmas for around $150

Post by **newbyferoza** » Fri Sep 22, 2006 6:35 pm

picked it up today, full clutch kit at rocklea for $200, was happy as needed to get it today

Outer Limits 4x4 Board

standard clutch

standard clutch

Who is online