Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

stearing noise

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 33
Joined: Sat Oct 15, 2005 9:31 pm
Location: Canberra

stearing noise

Post by big vitara »

hi all,

i have a noise when i turn the steering wheel when the car is stationary or moveing slowly. iv got a 92 jx vitara.

there hasnt been a change in the feel of the car on the road but theis noise started last saturday and it is realy giving me the shits!

thanks in advance.

Frazer
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

Please explain?


What sorta noise?
bru21 wrote:What happens in goat, stays in goat!
Posts: 33
Joined: Sat Oct 15, 2005 9:31 pm
Location: Canberra

sdfasdf

Post by big vitara »

sorry for lack of info.

it is a screaching noise, it sounds like it is in the steering collum. you somtimes hear it on old cars when they are at full lock.

hope that explains better. :?
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

Is it a power steering setup? Some cars can shudder when stationary and turning the wheels close to full lock. Or maybe the belt itself?
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

It 'll be lack of lubrication in the steering column. I've had it on a couple of Vitara's and it's not that uncommon. Doesn't seem to be a problem One person drilled a small hole and sprayed in motorcycle chain lube and that seemed to fix it. Another rckoned that there was a support bushing where it goes through the firewall that needs a good spray. Replacing the bushing with a sealed bearing is supposed to be a permanent fix. I haven't tried these myself as it hasn't been that bad yet.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 33
Joined: Sat Oct 15, 2005 9:31 pm
Location: Canberra

;lskdjfldas

Post by big vitara »

that description seems to fit the noise.

thanks for the help
Post Reply

Who is online

Users browsing this forum: No registered users and 74 guests