Hi! Since last I was on here I was asking about dowells in the F300 flywheel and thanks to those who replied. The turboed Feroza is ready to get handed over to my wife within the fortnight. Interesting thing! I've spent the last few weeks trying to remove power out of it! First pull on the dyno and it went 110KW at the wheels at 3800rpm before I pulled it up. Remeber this is with standard pistons and on normal unleaded petrol. If any one is interested I can expand on what is like now. Can anyone tell me whether I should get after market CV joints or genuine as the torque the engine makes has found a few worn weak spots.
Regards
Ashley Bolt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo Feroza thanks
Moderator: Tiny
woah, 110kw at the wheels is awesome 
Please post up pics and other info, the guys on here would love it!
I think genuine CVs would cost the earth.. a reconditioned shaft should do the trick I'd say... How often do you go offroad?
I was quoted $800 for a new drivers side CV when it packed it in
Please post up pics and other info, the guys on here would love it!
I think genuine CVs would cost the earth.. a reconditioned shaft should do the trick I'd say... How often do you go offroad?
I was quoted $800 for a new drivers side CV when it packed it in
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Conversion
Hi
The conversion was done by myself. The exhaust manifold I made out of 304 schedule 40 s/s pipe elbows, M400 motec ecu, bosch motorsport pressure regulator, mitsubishi evo1 injectors slot straight into the fuel rail. As the car is my wife's I made it so she can't rev it over 4000rpm until the oil temperature is over 60 degree C. I installed boost control proportional to throttle position and rpm to control power delivery. Three inche S/S exhaust to just before the diff then into 2.5 inche. Activated overrun fuel cut to stop the exhaust cakle when you backed off. The thing is very quiet fo rsuch a big exhaust system. Had to chop four cores off the intercooler to get it inconspicuous. I will get a few photos toghther.
Regards
Ashley Bolt
The conversion was done by myself. The exhaust manifold I made out of 304 schedule 40 s/s pipe elbows, M400 motec ecu, bosch motorsport pressure regulator, mitsubishi evo1 injectors slot straight into the fuel rail. As the car is my wife's I made it so she can't rev it over 4000rpm until the oil temperature is over 60 degree C. I installed boost control proportional to throttle position and rpm to control power delivery. Three inche S/S exhaust to just before the diff then into 2.5 inche. Activated overrun fuel cut to stop the exhaust cakle when you backed off. The thing is very quiet fo rsuch a big exhaust system. Had to chop four cores off the intercooler to get it inconspicuous. I will get a few photos toghther.
Regards
Ashley Bolt
Here's the s/s exhaust in one piece on the ground. I lipped the exhaust flanges so I didn't need gaskets. It's three inche all the way till the back muffler then goes to 2 1/2 inche. Placed wide band lambda sensor and EGT probe in it as well so can tune correctly. Also made a compensation on boost control so if EGT went above 900 degrees C then Boost would drop off.
regards
Ashley Bolt
regards
Ashley Bolt
To give you some idea, the manifold materials cost about 250 dollars but took about 40hrs in labour. Engine rebuild with decompressing, port job, rings about 400 dollars but 40hrs labour. Motec M400 with advanced features, loom, sensors, boost control valve, idle speed control valve, EGT probe and amplifier, additional temp and pressure sensors about 5300 dollars and about 45hrs labour. Hair dryer new 1050 dollars + 90 bend modification 100 dollars. exhaust system materials tube, flanges, cat, muffler and hangers about 1100 dollars but 60 hrs includes dump pipe. Bosch motorsport regulator and fuel rail mod with injectors about 950 dollars and 20 hrs labour. Plumbing which is s/s tube 2 1/2 inche cost 250 dollars and about 60 hrs labour. Intercooler and aluminum bends about 400 dollars with 50 hrs labour. Also hours of dicken around!! Theres more just can't think of it now.
Regards
Ashley Bolt
Regards
Ashley Bolt
that is sweet looking gear, would like to see pics of it all in the eng bay. 
how are you controling the boost? i mean the actuator to make it less when it gets to a certain exhaust temp..
makes my turbo conversion look very ghetto (but i am a ghetto modder, hehe).
how are you controling the boost? i mean the actuator to make it less when it gets to a certain exhaust temp..
makes my turbo conversion look very ghetto (but i am a ghetto modder, hehe).
pics, dribble, turbo conversion.... click [url=http://www.cardomain.com/memberpage/657917/1]here.[/url]
The motec drives a boost control valve until the manifold pressure I have in a table which is RPM verses throttle position is reached. The manifold is connected to this boost control valve and when it is off the manifold pressure goes straight through to the actuator. When the boost control valve turns on the actuator pressure is bypassed to atmosphere. This is a pulse width modulated output having the resonant frequency that of the boost control valve. In simple terms the more valve on time the more boost in the manifold. I then set up a compensation table that looked at the exhaust gas temperature so when the EGT was 900 degrees C it would remove boost from my look up table.
Regards
Ashley Bolt
Regards
Ashley Bolt
My wife is one of these freaks of nature that has to race everyone from the street lights, but doesn't want to give up here Feroza. You should see my kids hang on in the car.
Regards
Ashley Bolt
Ps. I can't really talk I have a 1200 ute with 344HP at the wheels and I'm doing a upgrade for that at this moment because its not quick enough.
Regards
Ashley Bolt
Ps. I can't really talk I have a 1200 ute with 344HP at the wheels and I'm doing a upgrade for that at this moment because its not quick enough.
i know how to 'bleed' the actuator for more boost (do that on the feral). with the one on my feroza i only run 3.5-4 psi max at the moment and had to modify the actuator rod so it would open earlier than the factory 7psi setting it has.asboltau wrote:The motec drives a boost control valve until the manifold pressure I have in a table which is RPM verses throttle position is reached. The manifold is connected to this boost control valve and when it is off the manifold pressure goes straight through to the actuator. When the boost control valve turns on the actuator pressure is bypassed to atmosphere. This is a pulse width modulated output having the resonant frequency that of the boost control valve. In simple terms the more valve on time the more boost in the manifold. I then set up a compensation table that looked at the exhaust gas temperature so when the EGT was 900 degrees C it would remove boost from my look up table.
Regards
Ashley Bolt
maybe i missed it in your posts above, but what is your normal boost setting and whats it go back to when the ex temp gets too high?
pics, dribble, turbo conversion.... click [url=http://www.cardomain.com/memberpage/657917/1]here.[/url]
A roza smokin up line lockies!! Hell yeah 
WOW!!
Suddenly the old feroza isnt so boring...
for those that dont know me I was round here many moons ago, but moved to a Forester GT, now I find it hard to drive a NA car!!
This thread is great, love to see something different being done and love the custom fabrication and welding.
Cant wait to see more pics!
P.S. Tufferoza... I knew your car as Ferocious, glad to see an equally crazy guy to Paul owns it now!! Great work!
Suddenly the old feroza isnt so boring...
for those that dont know me I was round here many moons ago, but moved to a Forester GT, now I find it hard to drive a NA car!!This thread is great, love to see something different being done and love the custom fabrication and welding.
Cant wait to see more pics!
P.S. Tufferoza... I knew your car as Ferocious, glad to see an equally crazy guy to Paul owns it now!! Great work!
On boooooost!!
Hi guys
Have just got home from out of town. As soon as I can get the photos loaded into photobucket I'll post them. Just remember this thing is still in development so I haven't tapped the loom up and I have a lot of sensors wired all over it for logging purposes. I still have to send the intake plumbing away for HPC coating, zinc plate the air box and clean the engine bay up.
To answer the question about what its like on the street, well, a pleasure to drive. A lot of throttle response and shit loads of torque every where with a big hump about 4000, this is still on normal unleaded petrol.
I still haven't explored antilag as yet, that's if anyone knows what that is.
Regards
Ashley Bolt
Have just got home from out of town. As soon as I can get the photos loaded into photobucket I'll post them. Just remember this thing is still in development so I haven't tapped the loom up and I have a lot of sensors wired all over it for logging purposes. I still have to send the intake plumbing away for HPC coating, zinc plate the air box and clean the engine bay up.
To answer the question about what its like on the street, well, a pleasure to drive. A lot of throttle response and shit loads of torque every where with a big hump about 4000, this is still on normal unleaded petrol.
I still haven't explored antilag as yet, that's if anyone knows what that is.
Regards
Ashley Bolt
Sounds good mate, cant wait to see more of it 
Are you contemplating an antilag system on it also??
The turbo will get hot hot if you use say a 'bang-bang' type of setup.. And I don't think it lasts very long on street driven cars.
Then again, just use left foot braking to keep the snail on boost
Or can you program your MoTec to control the fuel mixture and timing when you deccelerate? That'd be cool.. would be weird to drive for the first time
What turbo are you running and at what boost?? Is lag much of an issue anyway?
Are you contemplating an antilag system on it also??
The turbo will get hot hot if you use say a 'bang-bang' type of setup.. And I don't think it lasts very long on street driven cars.
Then again, just use left foot braking to keep the snail on boost
Or can you program your MoTec to control the fuel mixture and timing when you deccelerate? That'd be cool.. would be weird to drive for the first time
What turbo are you running and at what boost?? Is lag much of an issue anyway?
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests