Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

f250 diff identidication.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

f250 diff identidication.

Post by andrew e »

Im trying to ID a 2000 mod 6cylTD f250 front diff, I dont know if it is a d60 or d50. The only numbers are on a tag that says

248 4.10 V 2C34 GB - 611299-2

I think it is 4.1 ratio bu dont know anything else

Anyone?

Andy
Top
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

Post by wrksux »

try over on pirate4x4 or pavementsucks.com those guys should know
It's simple: questions are inherently good. Your questions... not so much

2003 GUIII turbo intercooled 4.2 DX
Top
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Post by jeep97tj »

I think only some F350s came out with D60 fronts.
Shane
Top
Posts: 51
Joined: Wed Jan 08, 2003 2:16 pm
Location: Melbourne

Contact:
Contact dbongard

Post by dbongard »

Do you know the inner spline count?

If not, send us a shot of the diff cover and we should be able to pick it for you.

-daniel
Air Locker
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

Search on this...

http://www.pirate4x4.com/tech/billavist ... index.html
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

the BOM no 611299 dosnt come up on the dana site at all

from looking at the dana site some more seems 2000 mod f250s came with a dana 50 (44 center with 60 knuckles)

if its cheap get it and buy a rockcrusher 60 center for it.....
www.overkill4x4.com
ph 94766137
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

OK, i'm fairly sure it is a D60 center as the site Micka posted states that 248 means 248mm (9 3/4") which is the diameter of the D60 ring gear, So if it has a D60 center, could it have D44 knuckles? i thought only D50s had D44 knuckles, or are a D60 and D50 center the same?

i'm lost and confused help.
Top
Posts: 51
Joined: Wed Jan 08, 2003 2:16 pm
Location: Melbourne

Contact:
Contact dbongard

Post by dbongard »

Dana 60, high pinion, reverse cut, 35 spline.

Nice gear for a 110 ;)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests