Having a slight problem with my dual battery setup. For some reason the control box that senses when
the engine is running or stopped is intermittantly not seeing the engine turn off. A small LED on the
box indicates when the battery is being charged and only turns on when the engine is started. When
the engine is then turned off the light should go out and the two batteries should no longer be joined.
For some reason the connection between the batteries is not being released and the light stays
on. If I then disconnect the earth from the chassis/body etc the light goes out and the connection is
dropped. As far as i can see there is nothing shorting, so im thinking its one of the components in
the control box that is faulty? Any ideas?
Cheers!
Moonman
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Dual Battery Problem
Moderator: -Scott-
Is it controlled by:
a) connecting the batteries when the engine is running or
b) when the main battery has a voltage higher that say 13v? or
c) when the ignition is not in the ON position?
Mine has a voltage sensitive relay that links the batteries. It stays on after I turn off the engine because the main battery still has high enough voltage. When it gets down a little the unit disconnects the two batteries.
a) connecting the batteries when the engine is running or
b) when the main battery has a voltage higher that say 13v? or
c) when the ignition is not in the ON position?
Mine has a voltage sensitive relay that links the batteries. It stays on after I turn off the engine because the main battery still has high enough voltage. When it gets down a little the unit disconnects the two batteries.
Shut Up, Get Out, & Start Digging...
Hmmm... Never thought of it that way? Its either A or B but B sounds like it could be the case. I will have to do a
little more investigating. If I use a multimeter on the main battery I should be able to tell what charge it is
at right? So lets say it is above the 13v when I have shut down the engine. All I should have to do is hit
the spotties/winch and the voltage should drop therefore dropping the connection between the batteries right..?
Moonman
little more investigating. If I use a multimeter on the main battery I should be able to tell what charge it is
at right? So lets say it is above the 13v when I have shut down the engine. All I should have to do is hit
the spotties/winch and the voltage should drop therefore dropping the connection between the batteries right..?
Moonman
Yep, once the voltage drops the controller will split the batteries.Moonman wrote:Hmmm... Never thought of it that way?
All I should have to do is hit the spotties/winch and the voltage should drop therefore dropping the connection between the batteries right..?
Moonman
Thats what mine does anyway. Some systems work off the ignition or running engine.
Shut Up, Get Out, & Start Digging...
Seems I still have a problem with my dual battery control box..? This time it might actually be a real problem!?
Since running my old mans fridge off the second battery to the point where the fridge has stopped, (wanted
to see how long it would last) I start the cruiser and the control box goes mental flicking on and off??? It will
stop for a bit then continue clicking even when driving. The clicking of it switching is easily heard even in the
cab. Not sure what is causing it as the main battery is new and fully charged, possibly a bad earth???
Maybe the sensors are buggered???
Any suggestions
Cheers!
Since running my old mans fridge off the second battery to the point where the fridge has stopped, (wanted
to see how long it would last) I start the cruiser and the control box goes mental flicking on and off??? It will
stop for a bit then continue clicking even when driving. The clicking of it switching is easily heard even in the
cab. Not sure what is causing it as the main battery is new and fully charged, possibly a bad earth???
Maybe the sensors are buggered???
Any suggestions
Cheers!
Yeah sure it is. Red wire to starting battery, white wire to aux battery, black wire earthed.
Says clearly on the box that's the way it's supposed to be? When I opened it up the
solder seems fine, nothing is loose. Suppose the sensors are on the way out. Will change
the earth wire tonight and see what happens. Never did this before i ran down the aux
battery so don't know if its a coincidence or what?
Need this to be working by Monday!!!
Cheers!
Says clearly on the box that's the way it's supposed to be? When I opened it up the
solder seems fine, nothing is loose. Suppose the sensors are on the way out. Will change
the earth wire tonight and see what happens. Never did this before i ran down the aux
battery so don't know if its a coincidence or what?
Need this to be working by Monday!!!Cheers!
Who is online
Users browsing this forum: No registered users and 2 guests