Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How do make sure my snorkel is water proof ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

How do make sure my snorkel is water proof ?

Post by CWBYUP »

So I've just made a dodgy snorkel for the 45s cruiser and want to know how do i make sure its water proof before i end up in the water.

Its not going to be over bonnet water ( i hope ) but still want to know how much i can trust it.

Cheers Nick
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

block it and hear if any air is being sucked through just make sure the thing you block it with is not going to get sucked into the engine.
Faling that take it to the beach
If you dont have panel damage you ain't trying hard enough
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

If you restrict the snorkel by covering it with your hand or whatever, you will be able to hear the air being sucked in thru any leaks there may be.

EDIT: Dang 5seconds earlier and i woulda been first in hehe
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

When i block my snorkle, the lid of my airbox (HJ75) caves in and air gets sucked in around the wing nut on the top, and maybe a little around the snorkle/airbox connecter.

I assume given this much vacuum is achieved, my snorkle is pretty water tight?
Last edited by dogbreath_48 on Fri Sep 29, 2006 8:13 pm, edited 1 time in total.
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

PJ.zook wrote:If you restrict the snorkel by covering it with your hand or whatever, you will be able to hear the air being sucked in thru any leaks there may be.

EDIT: Dang 5seconds earlier and i woulda been first in hehe
HA HA BEAT YA :D
If you dont have panel damage you ain't trying hard enough
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

being a turbo its a bitch cause you think its sealed and then another leak.

Prick ! Thanks for the info guys.

Nick
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

CWBYUP wrote:being a turbo its a bitch cause you think its sealed and then another leak.

Prick ! Thanks for the info guys.

Nick

Dude I cant work out how a turbo will make a difference :?
If you dont have panel damage you ain't trying hard enough
Posts: 189
Joined: Sat Sep 11, 2004 9:40 pm
Location: Cairns, Nth QLD

Post by meiamaro »

Undo Where the air intake joins the engine
and hold it as high as possible.
Then fill the sucker with water,
if it cant get out,it cant get it.
Make sure to tip out water before
re-attaching air intake. :oops:

Ian.
GQ LWB TD42 Turbo,(ps.water does not compress.)
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Stick a plastic bag over the intake of the snorkel and it should stall the engine. If it doesn't you should still hear the air leak!
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

wouldn't the bag just break :?:
Kind Regards,
Brad
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

I reckon it will be spat out the exuast
If you dont have panel damage you ain't trying hard enough
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

snork

Post by klrevo »

iv always just taken the snorkel head off and used my hand....

works a treat, gives good suction and also not much chance of being sucked in

dean ;)
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

Yeh when i hold my hold over the tip of my snorkly the car will stall. seems like a sure fire way of knowing :)
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Just because the engine stalls when you block the end of the snorkel, doesn't mean its water tight. It just shows its not getting enough air to run.
meiamaro, has the right idear. block the bottom and fill with water. If it dribbles any where, than its not water tight. ;)

Or... a more fun way,.... Park it in a big puddle with the top of the snorkel above the water and see if any water get in, say after an hour. :lol:
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

Zute wrote:Just because the engine stalls when you block the end of the snorkel, doesn't mean its water tight. It just shows its not getting enough air to run.
meiamaro, has the right idear. block the bottom and fill with water. If it dribbles any where, than its not water tight. ;)


Or... a more fun way,.... Park it in a big puddle with the top of the snorkel above the water and see if any water get in, say after an hour. :lol:
X2
bru21 wrote:What happens in goat, stays in goat!
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

if u put a plastic bag over the end and start it u get a funy sound then F**KING BOOM! scares the nieghbors.

also when u wash the car put a bag over snorkel sono water gets in
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Post Reply

Who is online

Users browsing this forum: No registered users and 141 guests