Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Workbenches

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Workbenches

Post by Damo »

Looking a building a work bench, but not sure how high to build it. I did a couple of mock ups and around 1000mm or just under seems OK to me.

How high are your workbenches???
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

about 900mm works good for most but it is a personnel thing.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

yeah make it to suit you i scored a 6m long steel workbench from a old school but it was only 700 high extended the legs around 200mm and its perfect

so yeah around 900 is good for me
Top
Posts: 196
Joined: Sun Mar 26, 2006 5:31 pm
Location: Redcliffe, Brisvegas

Contact:
Contact zer0

Post by zer0 »

you will find that the standard in aust for most bench tops is 900 off the ground but if you are building it your self make it to wat is comfy for you but not too high as you will want to be able to reach the back of it etc

Heath :armsup:
GIVE IT SOME S**T
my build http://www.outerlimits4x4.com/viewtopic.php?t=74420
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Like he says, 900 is standard height :)
Top
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Mine is closer to 1100 -good for me to work on and g/f cannot reach
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

I posed this question previously when i decided to build a work bench, both here and to a few mates who are in tool making.

What i was told is similar to what others have said. Build it to whats comfortable for you. This means, measure the distance from the ground to your elbow when your arm is bent at the waist. This is a good estimate of what height youl want.

I made mine 1m tall, but im 6'5".
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

I thought he was talking about beds....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Workbenches

Post by bogged »

http://www.popularmechanics.com/home_jo ... 73396.html

http://www.workbenchdesign.net/

have a google for work bench plans comes up with heaps of free plans like above
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Yeah about 900mm for most, but the general rule of thumb is about 4 inches above rooster height.. That's the attatched end of it by the way.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

get ya self some dexion pallet racking works great and you can adjust heieght when ever you need to
Top
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

saw this when loooking around their site

http://www.millerwelds.com/education/pr ... eld_table/
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests