Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series headlights

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

80 series headlights

Post by bruiser »

Any one know a price for genuine headlights spot and driving.
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

Dunno, but assume expensive... I just get bosch sealed beams from my local parts shop at $30 each.
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

$15 each...be aware that sealed beam and halogen are wired different....if you swap over, u need to rewire...the plugs
Andrew
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

genuine are $180 each. i got aftermarkets for 25 each and are just as good as the original.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 627
Joined: Sun Mar 27, 2005 7:51 pm
Location: Sydney

Post by guzzla »

go narva with tungstram globes. next best thing to daylight. bolt in replacement.
IF IT MOVES, SHOOT IT
IF IT DOESNT, CUT IT DOWN
IF ITS GREEN, PISS ON IT
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

guzzla wrote:go narva with tungstram globes. next best thing to daylight. bolt in replacement.
got these but took them back as the plugs didi not fit.

did you mod wiring?
Top
Posts: 522
Joined: Sat Jan 29, 2005 7:40 am
Location: Melbourne, Vic

Post by Toy80Diesel »

bruiser wrote:
guzzla wrote:go narva with tungstram globes. next best thing to daylight. bolt in replacement.
got these but took them back as the plugs didi not fit.

did you mod wiring?
I have Narva replacement lenses which came with a pair of H4 globes. only for the outer pair of lights. Its the same wires for the lenses with seperate globes(H4).

Are confusing them with the inner spots? (which are H1 globes, 2 pins not 3).
Shut Up, Get Out, & Start Digging...
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest