Does anybody know what's involved in converting a RH drive '75 40 series Cruiser to LH drive? It's a stock 2F petrol, with stock 4 speed gearbox and transfer.
Any info would be much appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40 Series Left Hand Drive Conversion
Moderators: toaddog, Elmo, DUDELUX
40 Series Left Hand Drive Conversion
'75 FJ40 No-Top ;) Stock 2F Petrol, Ironman HD Springs/Shocks, 31.5 Cooper ATR's on 8" Sunnies, Front disc conv, Vitara folding rear seats match Autotechnica sports buckets. 4 weeks in the making.
pedal set....
you can fab all the rest. ( you can fab the pedal set aswell, in fact it may bolt in that i think of it...)
the steering box you can use one out of a GM truck, there are some US based power steer conversion pages that would help you on that subject.
you can reuse the column,
you can reuse simply swap the glovebox and dash, weld some new tabs, and cut and shut the bottom bit where the coumn goes.
you may need the LHD heater box and piping because its on the opposite side, but you can also fab that up
OR, get a trashed fj40 dash and firewall. Easy cut and shut.
wireing is a piece of cake.
I have done a RHD conversion on poissibly the WORSE possibe car to do it on, and a cruiser is possibly one the easyest.
Cheers,
Jes
you can fab all the rest. ( you can fab the pedal set aswell, in fact it may bolt in that i think of it...)
the steering box you can use one out of a GM truck, there are some US based power steer conversion pages that would help you on that subject.
you can reuse the column,
you can reuse simply swap the glovebox and dash, weld some new tabs, and cut and shut the bottom bit where the coumn goes.
you may need the LHD heater box and piping because its on the opposite side, but you can also fab that up
OR, get a trashed fj40 dash and firewall. Easy cut and shut.
wireing is a piece of cake.
I have done a RHD conversion on poissibly the WORSE possibe car to do it on, and a cruiser is possibly one the easyest.
Cheers,
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
DUCATI <-----Worlds best warning label
Thanks Jess.
I was thinking about getting a fibreglass tub, the guys at East Coast Fibreglass in Noosa will do a left hand drive version for me.
Not sure if that's the way I want to go because there's no rust in this body and the fibreglass tub is worth a bit.
I was thinking about getting a fibreglass tub, the guys at East Coast Fibreglass in Noosa will do a left hand drive version for me.
Not sure if that's the way I want to go because there's no rust in this body and the fibreglass tub is worth a bit.
'75 FJ40 No-Top ;) Stock 2F Petrol, Ironman HD Springs/Shocks, 31.5 Cooper ATR's on 8" Sunnies, Front disc conv, Vitara folding rear seats match Autotechnica sports buckets. 4 weeks in the making.
You may have problems registering a vehicle that was Australian delivered as right hand drive after you've converted it to LHD.
A vehicle over 30 years of age that is imported LHD can be registered LHD.
A vehicle that has been Australian delivered and presumably registered at some stage RHD may not be allowed to be registered LHD for use on our roads.
You'd want to check that first. If you're looking to export it to the US to try and make a buck, do a LOT of research first. Original cars are worth good money in the US, cut and shut stuff is usually a fraction of this.
As far as the conversion process itself is concerened a 40 series would have to be the easiest thing to convert.
A vehicle over 30 years of age that is imported LHD can be registered LHD.
A vehicle that has been Australian delivered and presumably registered at some stage RHD may not be allowed to be registered LHD for use on our roads.
You'd want to check that first. If you're looking to export it to the US to try and make a buck, do a LOT of research first. Original cars are worth good money in the US, cut and shut stuff is usually a fraction of this.
As far as the conversion process itself is concerened a 40 series would have to be the easiest thing to convert.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Thanks James, but the vehicle is destined for a South Pacific Island - not to be registered for Aus.
Is it possible to buy a steel firewall, heater, dash etc. from the States? Does anyone know of any web sites? I've searched and haven't come up with much.
Is it possible to buy a steel firewall, heater, dash etc. from the States? Does anyone know of any web sites? I've searched and haven't come up with much.
'75 FJ40 No-Top ;) Stock 2F Petrol, Ironman HD Springs/Shocks, 31.5 Cooper ATR's on 8" Sunnies, Front disc conv, Vitara folding rear seats match Autotechnica sports buckets. 4 weeks in the making.
Thanks for the reply beanz - I was only on that site the other day and didn't see that stuff.
Jeebus... that's $5.5K AUD not including shipping, handling, import duty, insurance...
The fibreglass one is a little less, but would probably come around to the same price as what I can get from FRP or OzEast.
I think I might get handy with an oxy and mig!
Jeebus... that's $5.5K AUD not including shipping, handling, import duty, insurance...
The fibreglass one is a little less, but would probably come around to the same price as what I can get from FRP or OzEast.
I think I might get handy with an oxy and mig!
'75 FJ40 No-Top ;) Stock 2F Petrol, Ironman HD Springs/Shocks, 31.5 Cooper ATR's on 8" Sunnies, Front disc conv, Vitara folding rear seats match Autotechnica sports buckets. 4 weeks in the making.
Who is online
Users browsing this forum: No registered users and 123 guests