Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

crown wheel and pinion advise

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

crown wheel and pinion advise

Post by BUSTED100 »

Just wondering if any body could help me out, with the diff ratio of a 1993 80 series (Turbo diesel)? Destroyed the front diff and require a new crown wheel and pinion.
there was a small stamp with 41 on the side, I looked on Snake Racing site etc and believe it's the high Pinion 4.1, but would like to get some confirmation before ordering.
Thanks :lol:
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

4.1 was turbo diesel and 4.3 1hz.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday
All 80's were 41/10 or 4.1 high pinion....i have sent a PM, as i am local.
If he doesnt want to do this again, he needs to get an ARB locker centre up front...100% stronger support for the gear teeth.
Andrew
Top
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

Post by BUSTED100 »

dow50r wrote:Gday
All 80's were 41/10 or 4.1 high pinion....i have sent a PM, as i am local.
If he doesnt want to do this again, he needs to get an ARB locker centre up front...100% stronger support for the gear teeth.
Andrew
Thanks, received PM and will give you a call before the weekend, as for lockers I have the e-lockers which come standard in the Saharra but I feel it may be sticking/ not quite disingaging :roll:
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests