Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wheel spacers

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

wheel spacers

Post by short stuff »

where can i get some wheel spacers from about 10mm for sierra as my tyres are rubbing on leaf springs
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

pritty sure you can order them throu repco or auto pro

why not limit your steering a little?

your cv's will like you better with less steering lock.
Last edited by RB zook on Thu Oct 05, 2006 9:34 pm, edited 1 time in total.
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

why dont ya go to the laser cutters and get em to cut out sum rings? just make sure ur studs are long enough.
buggy time............
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

front wheel studs are longer and can be used on rear to solve various issues.

If you only need 10mm, you could turn down a drum or rotor or something to get 10mm

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 31
Joined: Fri Jul 08, 2005 12:22 pm
Location: Melbourne(East) or upside down in my zook on weekends!

Post by zukirolly »

do a search on ebay for wheel spacers, there's heaps on there.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest