Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rims offset

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

Rims offset

Post by 83zook »

Hey i was just wondering if there is anywhere in NSW where you can either buy or get your rims offset increased?
Top
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Contact:
Contact 85zook

Post by 85zook »

Probably easier to just buy a set of sunraysia's with the offset you require. Nice name btw :D
Top
Posts: 72
Joined: Fri May 21, 2004 3:14 pm
Location: Sydney

Post by treebruiser »

Neals wheels at 30 Gould st, South Strathfield will ghange the offset, re drill holes, make you spacers, whatever you want. cost for offset change is about $70 a corner and that does not include painting..... Would be cheaper to buy new with the offset you want
flog the ring out of it
Top
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

Post by 83zook »

Can you buy sunraysia rims with a big offset allready made? Where can you get them?
Mitch
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

83zook wrote:Can you buy sunraysia rims with a big offset allready made? Where can you get them?
Mitch
15x8 can be had in a -28 offset max. Speedy Rims desert rat is the rim that can be bought with this offset. What size rims do you want, and how big a offset do you want. Is this to clear springs, or are you after increased track??


Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

Post by 83zook »

I only want 15x7 rims, and are to both clear suspension components and increase track width.
Thanks
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

83zook wrote:I only want 15x7 rims, and are to both clear suspension components and increase track width.
Thanks

Go and talk to a wheel and tyre joint, check their catalogue for rims with a 5 on 5.5 PCD and large offset, then order or hunt some down. Easy as.


Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 96
Joined: Fri May 20, 2005 5:13 pm
Location: Chicago

Post by zuku26 »

I made this list to run 17's but you can use it on 15's it might be helpful
http://bbs.zuwharrie.com/content/topic,42287.0.html
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

83zook wrote:I only want 15x7 rims, and are to both clear suspension components and increase track width.
Thanks
The largest off the shelf -ve offset 15x7s are -15. These will increase your track width 50mm overall, which coincidentally is as much as you can do legally (in Qld anyway).

I'm pretty sure these will allow you to run a 31x10.5 without rubbing on the front springs on full lock.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 5 guests