Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rock Sliders - Drawings/Dimensions
Rock Sliders - Drawings/Dimensions
Anyone know where i could possibly get a set of rock slider drawings or measurements to suit a LWB GQ, so that i can make them myself as I have all the pipe and angle and other bits readily available. This will save me some time trying to figure it out. I would like them to be used as a high lift jacking point as well. Any info would be great.
Re: Rock Sliders - Drawings/Dimensions
http://www.geocities.com/george_tlc/
heres some ideas from an 80, just make the measurements to suit your own.
heres some ideas from an 80, just make the measurements to suit your own.
I just used 2 1/2 inch pipe the full lenght of the car capped the ends and used 2 1/2 inch angle 1/4 thick and ran 3 legs back to the chassis used 2 1/2 x 1/4 flat bar for the brackets which bolt to the chassis placed the bar about 6 mm away from the body ive had the full weight of the car on them heaps of times and they have never moved yet
Who is online
Users browsing this forum: No registered users and 0 guests