Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What do I make it From ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

What do I make it From ?

Post by CWBYUP »

Well i'm just the mig going again so I thought I'd make some sliders for my Zuk. Just wondering what to make them from ?

I don't have my tube notcher yet so i was thinking of going bolt on and make it from square tube.

What do you reakon ?

Nick
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

i made mine out of round first and didnt like the look of it that much. then made it out of sqaure and like it a lot better.

to notch pipe with out a notcher or mill, just mark out what you want notched and use a grinder with a flap disc.
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 30
Joined: Fri Aug 18, 2006 3:08 pm
Location: Geelong, Vic

Post by Rem 22250 »

Or mark it then use a metal hole saw. Take it slowly and plenty of cutting compound will give great results.
No Hurry
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests