Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fj62 arse end caster

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1
Joined: Thu Sep 14, 2006 11:49 pm
Location: Melb_Aus

fj62 arse end caster

Post by Claged_FJ62 »

yo dudes, my 62 looks like the caster is off on the rear when looking from the back but the axles are centred in the gaurd. Whats with this??

p.s I have just fitted new 2 inch lift springs and its the same as it was before. It dosent look like the body is twisted.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: fj62 arse end caster

Post by Shadow »

Claged_FJ62 wrote:yo dudes, my 62 looks like the caster is off on the rear when looking from the back but the axles are centred in the gaurd. Whats with this??

p.s I have just fitted new 2 inch lift springs and its the same as it was before. It dosent look like the body is twisted.
caster is to do with an axle that steers. You cannot have caster on an axle with wheels that do not steer.

Caster is the angle to which the steering pivot axis is tilted forward or rearward from vertical, as viewed from the side. If the pivot axis is tilted backward (that is, the top pivot is positioned farther rearward than the bottom pivot), then the caster is positive; if it's tilted forward, then the caster is negative.


Not sure what you mean.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Re: fj62 arse end caster

Post by Ruffy »

Shadow wrote:
Claged_FJ62 wrote:yo dudes, my 62 looks like the caster is off on the rear when looking from the back but the axles are centred in the gaurd. Whats with this??

p.s I have just fitted new 2 inch lift springs and its the same as it was before. It dosent look like the body is twisted.
caster is to do with an axle that steers. You cannot have caster on an axle with wheels that do not steer.

Caster is the angle to which the steering pivot axis is tilted forward or rearward from vertical, as viewed from the side. If the pivot axis is tilted backward (that is, the top pivot is positioned farther rearward than the bottom pivot), then the caster is positive; if it's tilted forward, then the caster is negative.


Not sure what you mean.
X2
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

tippen he means camber. bent diff or colapsed wheel bearings.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

mule75 wrote:tippen he means camber. bent diff or colapsed wheel bearings.
If the camber was out enough to be noticeable, the rear end would destroy itself very quickly and oil would be covering his driveway.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest