Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 Series Intercoolers
Moderators: toaddog, Elmo, DUDELUX
80 Series Intercoolers
Multivalve Turbo Diesel..
what intercoolers can anyone recomend, what work good?
prefer top mount, to protect it a bit more from flying rocks etc?
what intercoolers can anyone recomend, what work good?
prefer top mount, to protect it a bit more from flying rocks etc?
Go have a look here
http://www.are.com.au/
They make all sorts of size coolers and they look like quality stuff.
Also the website has prices! gotta love that.
Send them an email and they will tell you what min-max size you need.
http://www.are.com.au/
They make all sorts of size coolers and they look like quality stuff.
Also the website has prices! gotta love that.
Send them an email and they will tell you what min-max size you need.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
DTS has a kit for their tyrbo which would probably be adaptable to the factory turbo:
http://www.dynamicturbo.com.au/default.asp?p=113
they also do a front mount kit, as do safari
cheers
http://www.dynamicturbo.com.au/default.asp?p=113
they also do a front mount kit, as do safari
cheers
Best ive heard is $1200 from Cooma Diesel for the APS kit self install, then they dyno the motor.
APS make the complete kit for the t/d and there is major torque increases like 380 becomes 500mn
Most of this is attributed to the motor dyno mods though.
Front mounted is the only way to go as motor heat reduces efficiency. No overheating problems with the APS kit and the cooler is robust (i know i have one)
Andrew
APS make the complete kit for the t/d and there is major torque increases like 380 becomes 500mn
Most of this is attributed to the motor dyno mods though.
Front mounted is the only way to go as motor heat reduces efficiency. No overheating problems with the APS kit and the cooler is robust (i know i have one)
Andrew
I wonder if they'll sell to me at all since I didn't buy their turbo? know any suppliers closer to sydney who will do a similar deal? as much as I love driving, I'm not all that keen on a drive to Cooma just for a tune up ;)
I emailed APS and asked them to quote supply only, will see how it goes.
cheers
Brian
I emailed APS and asked them to quote supply only, will see how it goes.
cheers
Brian
I got email back from APS, they quoted me rrp of over $2000 for the kit plus around $500 installation, and said they wouuldn't ship me one and that I'd have to go to one of their local distributors.
plus hinted that it was specific to the safari turbo, so I'm wondering how much difference is there really? the only thing I can see that would be different is mathing the cooler plumbing up to my turbo outlet, position and/or diameter might be slightly different, but a little bootie here and there to massage it all into position couldn't be all that difficult, right?
plus hinted that it was specific to the safari turbo, so I'm wondering how much difference is there really? the only thing I can see that would be different is mathing the cooler plumbing up to my turbo outlet, position and/or diameter might be slightly different, but a little bootie here and there to massage it all into position couldn't be all that difficult, right?
Who is online
Users browsing this forum: No registered users and 0 guests