Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Why can't i ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Why can't i ?

Post by LuxyBoy »

Why is a tube notcher necesarry as opposed to just a vice and drill press?

My logic is use a metal hole saw the same size as the tube you are connecting and get it centred and locked with a vice. Drill through and it should fit snuggly, right?
Kind Regards,
Brad
Top
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

thats right.... and if you only have one cage or tray or what ever to build then do it that way. But a notcher will give you the angles and do the job in less time with less fuss. I bought one and it kicks arse.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Top
Posts: 281
Joined: Sat Dec 20, 2003 5:45 pm
Location: Gold Coast - Pac Pines

Contact:
Contact Bowhunter

Post by Bowhunter »

So, where do I get a notcher and about how much are they?

cheers.
[url=http://www.aussiebowhunter.com][b]Founder TBGA - September 29, 2001 - Australia's Premier Bowhunting Site[/b][/url]
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

You don't need a notcher. I've built 2 trays, sliders and roll cages and I haven't used a notcher. Just use an angle grinder with a cutting disc and cut the pipe with 2 straight cuts on about a 30 degree angle so the end of the pipe is pointed. It isn't too hard to do. It does get a little tricky when you are joining on a tight angle or at a junction of 3 pipes. That's where a grinding disc is very useful. And MIG stands for Metal In Gaps lol
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

oxy torch
Top
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

i got mine off ebay. $200 with out the hole saw's. you could also try speedwerx www.speedwerx.com.au
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests