zook transfer

Post by **Turbo Tonka** » Sun Oct 22, 2006 9:09 pm

hey all,how would i go at putting a 1.3 transfer into a 1 litre zook???what needs to be changed? or is there any 1 litres transfers with the 4wd light going at the moment so i could gear it? thankyou

Post by **muppet_man67** » Mon Oct 23, 2006 8:59 am

I think you just need to swap the flanges over with some 1 liter stuff.

Post by **muzook** » Mon Oct 23, 2006 8:02 pm

to put a 1.3L transfer in yours you would need to fab some new mounts as they are different to 1L, also the tail shaft flanges are different but thats the easy part.....what you want is like you said a 1L transfer case with 4wd light switch then you will have very little problems it will go straight in with the gears..hope that helps

Post by **nicbeer** » Mon Oct 23, 2006 8:36 pm

Yep your right on that one. If you already have or sposed to have a 1ltr transfer with 4wd light in urs then a 1.3 one will bolt in, flanges pending.

Nic

Post by **sierrajim** » Mon Oct 23, 2006 10:41 pm

Turbo Tonka wrote:hey all,how would i go at putting a 1.3 transfer into a 1 litre zook???what needs to be changed? or is there any 1 litres transfers with the 4wd light going at the moment so i could gear it? thankyou

Have you fitted reduction gears to the 1.3 case?

If not are you aware that the 1.3 case will make your gearing worse than the 1.0ltr case?

Outer Limits 4x4 Board

zook transfer

zook transfer

transfer

Re: zook transfer

Who is online