Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

air tank pressure

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

air tank pressure

Post by Ruggers »

does anybody know what pressure the arb compressor pressure switch, cuts in and out at, as at the moment this is only the small one i can get. till i can get an adjustable, and does anybody know if at this pressure i will be able to run an impact gun at this pressure. thanks chris
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

from memory in an old post here it was 100psi......
im sure someone in the know will correct me if im wrong
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Contact:
Contact MUSS

Post by MUSS »

yep thats right its 100PSI on the dot no more no less..... i think :roll: :rofl:
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

it comes ON at about 85 psi and turns OFF at about 105 psi, aboth are +/- about 5 psi, and yeah it's plenty to run most 1/2" rattle guns.

have a look at airbagit.com, they have a range of pressure switches, not sure if they will do international sales though.
Top
Posts: 45
Joined: Sun Feb 23, 2003 9:08 pm
Location: brisbane

Post by 80series chris »

Hi chris i just use the standard arb presure swith on my set up and it runs a rattle gun etc with no problems, just have the revs up a bit of idle on mine around 1200 rpm seems ok but it depents on each type of engine
regards chris
80 series 6inch lift f&r air lockers 34 jt'2s homemade endless air f&r bars dwr unit rock slidder bars and lots of other goodies
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

mine cuts out at around 110 psi, but that is an old gauge so it might be a bit out
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests