Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Clunk!
Clunk!
Dont know if anyone is experiencing this, but its got me perplexed. Sometimes when turning (either way, but mostly noticable when turning left) I can hear and almost feel a "clunk" coming from what feels like under my feet or slightly behind me. I thought this would have been erraticated when I had the suspension done (2" lift new shocks springs etc), but it has not changed. Most of the time it is only apparent under heavy body roll or when there is pronounced articulation, but oddly enough is at its worst when it is raining or the undercarriage is wet.....then even easy turns comes accompanied with a clunk.
Anyone got any ideas?
Anyone got any ideas?
1995 Suzuki Sierra SWB
1997 Pajero GLS LWB iTD
1997 Pajero GLS LWB iTD
clunk
yep got the same problem. my solution is deal with it!
thats not very helpfull of me.
so:
body mounts, radius arm bushes or loose nut on rear of either radius arms, crack in floor (where floor pan meets firewall is usually where they crack), free play at any of your steering linkages or pan hard rod, crack in chassis where the steering box bolts up,
there is few thing to look at hope one of them is you problem. good luck
thats not very helpfull of me.
so:
body mounts, radius arm bushes or loose nut on rear of either radius arms, crack in floor (where floor pan meets firewall is usually where they crack), free play at any of your steering linkages or pan hard rod, crack in chassis where the steering box bolts up,
there is few thing to look at hope one of them is you problem. good luck
dont tell the missus
Get someone to listen outside for an clunks when you move the steering back and forth while its on. Should be able to work out where the noise is coming from.
If nothing while stationary.
Check list:
Radius arms nuts near the chassis
Gear box cross member bolts and rubber mounts nuts
Body mounts
Exhaust rubbers
If nothing while stationary.
Check list:
Radius arms nuts near the chassis
Gear box cross member bolts and rubber mounts nuts
Body mounts
Exhaust rubbers
88 GQ SWB 6" Lift 35s + a few scars
Re: Clunk!
just had my one do the same thing check the uper bolt on the front panhard as it could be alowing te steell insert to move a little i took out the lock washer put a flat one in and gave it a good tighten niose gone
Who is online
Users browsing this forum: No registered users and 2 guests