Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Needed Urgently

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 35
Joined: Tue Mar 07, 2006 10:44 pm
Location: 4wding around SEQueensland

Needed Urgently

Post by nudge2325 »

I urgently need all the specs to do a head gasket change on an 85 petrol pajero.

I need head bolt torque figures and any info required to do the job.

cheers
nudge
1994 80 Series Land Cruiser GXL
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Have you bought your headgasket yet? Last one I bought had torquing instructions with it, including the appropriate tightening sequence for head bolts and camshaft caps.

From a Gregory's manual for a Sigma 2.6:

Cylinder head bolts: 110Nm
Cylinder head - timing cover: 12Nm
Camshaft cap: 19Nm
Camshaft sprocket: 58Nm.
Top
Posts: 35
Joined: Tue Mar 07, 2006 10:44 pm
Location: 4wding around SEQueensland

Post by nudge2325 »

Yeah i picked up the gaskets today for the head and inlet and exhaust.
And yes it does have the torquing details for the head on it.
Thanks for the setting for the cam and sprocket

Cheers
Nudge.

Maybe i can do some serious playing soon once its fixed
1994 80 Series Land Cruiser GXL
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests