Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

94 model SR5 Auto Lock Hubs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 14
Joined: Sun Mar 27, 2005 7:33 pm
Location: Western Sydney

94 model SR5 Auto Lock Hubs

Post by plumber »

Just picked up a 94 xtra cab sr5 for a fair price, needs a little work

the vacuum operated solenoids (well i thought it was)
that lock and unlock the hubs are stuffed and the button on the transfer lever is not operative,
whilst out at my mates place this arvo, i swapped the hoses over from each solenoid 2 engage 4wd, drove it around the paddock, and then reconnected the hoses back to their original position, and continued 2 drive around waiting for 4wd 2 disengage, but 2 no avail, is still in 4wd

could this be either a vacuum pump fault on the diesel alternator, or something that has let go in the transfer box,

would be interested 2 know, b4 i start trouble shooting

cheers

Rob
gq wagon, 5inch coils, 33 dick cepeks, rear locker, sliders, rear quarter chop, 4.2 turbo diesel high flowed and anneroid injector pump, 3inch exhaust,
give it arseholes!!!!!
Top
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

Do yourself a favor and swap them for free wheeling hubs if you do crown wheel its easy to get home
If you dont have panel damage you ain't trying hard enough
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Are you talking about the device between the diff housing and the left hand axle tube?
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

mudmacaca wrote:Do yourself a favor and swap them for free wheeling hubs if you do crown wheel its easy to get home
X2.

My brother had these on his Hi-lux. Never worked from the day he bought them. Took them back to the dealer 4 or 5 times and still nothing but hassel. In the end I swapped them for manual locking hubs. He is much hjappyier as he now knows that they are either in or out before finds out teh hard way.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

the vacuum operated solenoids (well i thought it was)
Don't mean to hassle but when I was doing an oil change on the weekend I noticed for the first time a device between the diff and the axle tube on the passenger side of the front diff.

I was going to post a question about it but this appears to be the same part you are talking about.

Am I correct in assuming that it is an actuator for the auto hubs :?:

Cheers Struth
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 107 guests