Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

caster for trail only rig

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

caster for trail only rig

Post by 4sum4 »

what caster would be best for a trail only rig,I got to rotate the nuckles and this is were there at now
Image
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

is that positive 3 or 4 degrees? that should be ok for offroad and onroad, i think cruiser and lux castor from the factory is positive 3. Are you linking the front or sticking with leaves? if linking make the upper/s adjustable.
Yurich Design Services
www.yds.net.au
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

Yeah linking the front now,the reason is for pinion clearance to bell housing(rolled the diff down),I want to stick with a high pinion
I`m not quite sure on pos and neg with caster but I`m sure thats neg,I`m sure it`s 2-5 pos is good for onroad
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

if you draw an imaginary line through the centre point of both swivel bearings this is the castor angle... if its pointing towards the front from zero its positive, back is negative, from the looks of your pic its positive 3-4 degrees.
Yurich Design Services
www.yds.net.au
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

We run the buggies @9 degrees
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

did you eye ball your castor angles sam? because they're not 9* and they're not the same either. :lol:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest