Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Coil Spacers

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 27
Joined: Wed Mar 09, 2005 2:58 pm
Location: hobart

Coil Spacers

Post by TASPAJ »

Just wondering if anyone has seen coil spacers available to fit the LWB NH.
I have seen them to fit cruisers and pootrols but not the Paj.
I want around 30mm just the lift the back up a bit more. I brought new 2 inch progressive rate king springs about 3 years ago and they sagged quite a bit in 3 years. What I should have done is buy the heavy duty 2 inch lifted king springs, I think this would have been the better choice.

Cheers!
Pajero NH GLS 3.0 32" BFG Muds Kingsprings 2" ARB Bull Bar.
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Post by Glennb »

i DONT THINK YOU CAN GET COIL SPRING SPACERS FOR PAJEROS. IM NOT SURE ABOUT THE NH BUT FOR MY NJ I CAN FIT PATROL SPACERS IF I CUT 4-5MM OUT OF THE CENTER OF THE SPACER.
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Post by 88pajero »

A while ago I was using 30mm spacers from an 80 series. I have a nf though, but I think the springs are the same. All I had to do was make a slight groove where the spring seated.
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Yeah i run 1" spacers on top of my 2" springs with no drama's. They were for a patrol, but as swbpajero said, you just have to take a small amount out of the centre so they sit up into the cradle!
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Post by JOHNZ »

Coil spacers for pajero $40 pr
cheers mate
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Posts: 30
Joined: Wed Apr 06, 2005 10:55 am
Location: Venezuela, South America

Post by Alej Altuve »

What kind of materials do you use for the coil spacers??? rubber?? aluminun?? steel??
Do they make noises???
Montero 98, Gen2, Leaf sprung, 5sp man, 3.0 lt 12 valve, 4.625 gears, 1.925 T-case, custom snorkel, custom bull bar, custom shackels, add a leaves, 2inch lift, CB radio, 32x11.50 Pirelli AT.
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Post by JOHNZ »

Alej Altuve wrote:What kind of materials do you use for the coil spacers??? rubber?? aluminun?? steel??
Do they make noises???
Urethane
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Posts: 27
Joined: Wed Mar 09, 2005 2:58 pm
Location: hobart

Post by TASPAJ »

what kind of lift is this going to get me. 30mm 50mm?

Cheers!
Pajero NH GLS 3.0 32" BFG Muds Kingsprings 2" ARB Bull Bar.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

TASPAJ wrote:what kind of lift is this going to get me. 30mm 50mm?

Cheers!
It all depends on the thickness of the spacers.

Gut feel, anything taller than 20 or 30mm and you should get new springs.
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Post by JOHNZ »

TASPAJ wrote:what kind of lift is this going to get me. 30mm 50mm?

Cheers!
Coils spacers for paj 10mm,20mm,30mm.
cheers
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests