Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bullbar indicators

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
Emo
Posts: 4137
Joined: Thu Jan 15, 2004 12:46 pm
Location: Sunshine Coast

Bullbar indicators

Post by Emo »

I've just picked up an old winch bar of unknown manufacturer off eBay for my 80 series and I'm looking for indicators (or indicators / park lamps) to fill the holes. The holes are 200mm x 100mm. Any assistance would be appreciated.
Top
Posts: 69
Joined: Tue May 09, 2006 9:58 am
Location: melbourne,VIC

Post by GU4me »

tjm do a clear indicator kit for $50 not sure on size but comes with everything
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

I too bought an old bar that needed indicators. I went down to the local auto shop and they ordered in a set of Narva indicators for them. Apparently the ones I needed were a common size.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Posts: 1287
Joined: Wed Oct 05, 2005 9:12 pm
Location: The city of churches and bizarre sex murders

Post by rojak »

Get some plate and weld them.
Top
User avatar
Emo
Posts: 4137
Joined: Thu Jan 15, 2004 12:46 pm
Location: Sunshine Coast

Post by Emo »

rojak wrote:Get some plate and weld them.

I think that's what I'll have to end up doing. Neither Narva or Hella make anything the size I need. I think that I'll get the bar modded so I can fit a common size in it.
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

how about showing us a pic of your bull bar,someone might have the same one
if you have the guts....follow my ruts!
Top
User avatar
Emo
Posts: 4137
Joined: Thu Jan 15, 2004 12:46 pm
Location: Sunshine Coast

Post by Emo »

dirty harry wrote:how about showing us a pic of your bull bar,someone might have the same one
Good idea. These are the two eBay photos.

Image

Image
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

looks like someone has cut the hles to fit a set of spotties, i would weld them up
if you have the guts....follow my ruts!
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Yeah i think they were cut for driving lights. Don't some 80's have indicators under the headlights?
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

That looks the same as my tjm bar, except the holes are lot bigger than my indicator holes. I would agree and say they have been made bigger by someone in the past.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests