Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Clutch is dead?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 30
Joined: Wed Oct 12, 2005 6:08 pm
Location: Mona Vale, Sydney

Clutch is dead?

Post by hetfield_86 »

Hey just started noticing that my car is revving to much when i accelerate rather than actually giving me more power. A friend told me this would be the clutch but thought I would double check witht he board before I went out and got a new clutch. It has now gotten to the point where I can only drive it pretty slowly and it revs heaps rather than actually driving...
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Post by MyGQ »

if its revving but not accelerating yes its about to die

U'll really notice it up hill under load,

Mine did the same, i wa at Lithgow and had to get back to Gosford, found out that if u rev the enginer harder rather than labouring it you save the clutch a bit more :)
AA's for Quitters
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

yup clutch is gone.
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Posts: 98
Joined: Sun Dec 04, 2005 5:09 pm
Location: cessnock

Post by CruiserPatrol »

Yeah, just worth checking that your slave is releaseing properly first. I had a similar problem and found that the slave was full of s##t. Installed a new one for $40 and no more slip, unfortunatley the slip also damaged the clutch and will need replacing prematurley, but worth a look before doing the hardest job there is on the GQ, pulling the box. I have that to look forward to. It is worth changing the slave anyway so you now it is right with the new clutch.

Good luck Dave
I'll give it a go!!!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest