Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ct20 intake on a 3l

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 38
Joined: Mon Sep 25, 2006 8:56 pm
Location: Toowoomba QLD

ct20 intake on a 3l

Post by 93lux »

Righto I have finally put my CT20 on my 2.8d and all is going pretty well except for the turbo intake and boost pipes. I have scrapped the idea of intercooling for the time being. What do all you guys use for the plumbing, I was thinking 2 inch exhaust tubing from the turbo to the inlet manifold. Any pics would help

Cheers
Last edited by 93lux on Sun Oct 29, 2006 10:44 pm, edited 1 time in total.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

I think my mate runs 3in just to the back of the cab sounds sweet but he's running a bigger turbo than the ct20 also being turbo'd it doesn't need back pressure so i'd make it to big rather than to small
plenty of parts on the bench
Top
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Post by Yumsylux »

try hunting around the wrecks for all that plumbing off a surf. mine runs all the plumbing off one. I am considering getting wider pipes though. This would help up performance a bit?
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

alloy or stainless... dont use mild steel...
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

I bought all mine brand new from mtq turbo at salsbury,its the dts cast iron set up only paid about 250.
Top
Posts: 38
Joined: Mon Sep 25, 2006 8:56 pm
Location: Toowoomba QLD

Post by 93lux »

bastard,

Did it bolt on without any mods. The reason I ask this is because I was toying with the idea. Have you got pics.
Top
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

I cut a bit off one of the pieces from the turbo to the manifold,but nothing major also i didnt have air con ,but if you did it would be tight but ive seen photos of other after market turbos and thats how they are.Ive had mates bend up stuff at the exhaust shop and it wasnt much chop,not only that those little peices of orange rubber that connect those little peices of pipe together are ridiculously priced and they come in the kit,from memory that hose stuff is about 180 a meter and lewis hoses and seals have a minimum buy of one meter.
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

bastard wrote:from memory that hose stuff is about 180 a meter and lewis hoses and seals have a minimum buy of one meter.
You talking about silicon intercooler hose? If so, rocket ind. sells 2.5" diameter for about $90 a meter.
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

Thanks thats handy to know.
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Post by Gribble »

If your using a CT20 you can buy the factory TD surf intake hose from toyota that will let it fit around the aircon compressor.
\m/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests