Well I have a swb spoa 91 zuk. I also have a 84 ? LWB chassis and was thinking about changing it all over.
What do i need to look for ? Will the body mounts line up ? It will be cut down into a ute and is a soft top.
Any one done this before ?
Nick
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
SWB to LWB differances ? What to look for.
Re: SWB to LWB differances ? What to look for.
If they are both 1.3 then either way it will work, all body mounts line up. Can't be 100% sure for 1 litre stuff as i've never done it but i'm pretty sure you would be right with them too.CWBYUP wrote:Well I have a swb spoa 91 zuk. I also have a 84 ? LWB chassis and was thinking about changing it all over.
What do i need to look for ? Will the body mounts line up ? It will be cut down into a ute and is a soft top.
Any one done this before ?
Nick
The 1 litre and 1.3 litre engine mounts are different though, so you may run into problems there.
You will need a LWB tailshaft (or custom) and a LWB handbrake cable.
Vitara engine into a 1.3 chassis, just keep the engine mounts.CWBYUP wrote:Thanks mate
I need custom engine mounts any way as its a 1.6L Viatara motor.
It is a 1L LWB chassis any one got a 100% answer on them lineing up ?
Thansk Nick
Vitara engine into 1.0 chassis you will have to cut them off and weld on new ones.
Who is online
Users browsing this forum: No registered users and 1 guest