Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front and rear diff's

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 12
Joined: Fri Oct 13, 2006 1:25 pm

Front and rear diff's

Post by MUD RAT (Benny) »

Just wondering if the front and rear diff's a interchangeable in a 92 softy 1.3 i have a locker in the rear and i was wondering if i could put it up front.
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

interchangeable but you need different side gears as the front has smaller axles compared to the rear
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

Sierra rear axles are bigger and different spline.
Everything else in diffs are the same.
So can't do a direct swap, unless you want the heavy duty after market axles/cvs which use a rear up front.
If it is an auto locker that does not change side gears, it could be made to fit front.
I doubt air lockers change over, cause they replace entire centre (I believe)

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

christover1 wrote:Sierra rear axles are bigger and different spline.
Everything else in diffs are the same.
So can't do a direct swap, unless you want the heavy duty after market axles/cvs which use a rear up front.
If it is an auto locker that does not change side gears, it could be made to fit front.
I doubt air lockers change over, cause they replace entire centre (I believe)

christover
somone said on here recently that arb can change different the different side gears in. otherwise get some of these. Image
[url]http://www.vic.suzuki4wd.com/forum[/url]
Posts: 12
Joined: Fri Oct 13, 2006 1:25 pm

Post by MUD RAT (Benny) »

thanks fellas wanted to know if it was a direct swap sounds to hard for now but it is a lock rite locker, does that mean it could fit.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

As long as you change the side gears over to front diff side gears (different spline count and diamiter) you can use in in the front.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 445
Joined: Mon Apr 18, 2005 12:32 pm
Location: Victoria

Post by mistaboz »

Do the side gears need to be specific arb?
Looking into buying an airlocker that has been in the rear of a zook...
Can i just use original Sierra side gears or do I need to ARB ones?

Cheers Paul.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Airlocker side gears are unique to the airlocker. If you have a very switched on ARB agent/diff guy you MIGHT be able to get the parts, pull the airlocker apart, fit the correct side gears and re install it in the front.

They might not be interested though.

Double toughs are the answer :armsup: (Ps these now come with CTM made inner axles and they are beeee-utiful.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 445
Joined: Mon Apr 18, 2005 12:32 pm
Location: Victoria

Post by mistaboz »

So the double toughs will fit a rear arb airlocker? Same spline coutn correct?
Is an expensive way of going about it just for 32's though...
Thanks for the reply.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests